Marine Economy Product Top Coats
Roxy Marine Enamel
This is a solvent based finish coat. CBased on suitable Synthetic Resins, Rutile Titanium Dioxide & quality pigments Its saline water resistance properties make it suitable for marine environment.
AREA OF APPLICATION:
It is used on all iron and steel and Wood & cane surfaces of all river or sea-going vessels, pontoons, sea-shore structures etc.
SHADE:
As per Roxy Enamel shade card. Other color can be supplied on request
TECHNICAL INFORMATION:
Viscosity
100 - 110 seconds/BSB4/30ºC
Gloss
High Gloss
Thinner
Roxy G .P. Thinner
Thinning ratio
5 – 10 %
Coverage
550-600 sft / 3.64 liters. On non absorbent surface
Recommended DFT
25-30 microns / coat
Flash point
Above 70º F
DRYING TIME:
Surface dry:1 – 1.5 hrs
Hard dry:10 - 12 hrs
Recoating time:After 12 hrs
Shelf Life
One year in sealed container when kept in cool and dry place.
Pack Size
3.64 Ltr, 18.2 Ltr
The information given herein is to the best of our knowledge accurate and is believed to be reliable. We do not take any responsibility since the conditions of use are beyond of our control. For further information please contact our sales center nearest to you.
