Marine Premium Product Undercoats
Sea Guard Undercoat
This is used under the top coat to enhance its performance Based on Selected Synthetic resin, Rutile Titanium Dioxide & stable Extenders Its saline water resistance properties make it suitable for marine environment.
AREA OF APPLICATION:
It is used on all iron and steel and Wood & cane surfaces of all river or sea-going vessels, pontoons, sea-shore structures etc.
SHADE:
White but other color can be supplied on request.
TECHNICAL INFORMATION:
Viscosity
100 - 110 seconds/BSB4/30ºC
Gloss
Eggshell
Thinner
Roxy G .P. Thinner
Thinning ratio
10 – 15 %
Coverage
550-575 sft / 4 liters. On non absorbent surface
Recommended DFT
30 microns / coat
Flash point
Above 70º F
DRYING TIME:
Surface dry:60-75 minutes
Hard dry:18 – 24 hrs
Recoating time:After 24 hrs
Shelf Life
One year in sealed container when kept in cool and dry place.
Pack Size
4 Ltr, 20 Ltr
SURFACE PREPARATION
The surface must be properly cleaned and free from rust, old paints, grease, wax, salt deposit or other contaminants. Repair surface defects before painting.
The information given herein is to the best of our knowledge accurate and is believed to be reliable. We do not take any responsibility since the conditions of use are beyond of our control. For further information please contact our sales center nearest to you.
