Marine Premium Product Undercoats
Sea Guard Zinc Chromate Primer
Based on Selected Synthetic resin, Zinc Chromate pigment & stable Extenders. Chemically rust inhibiting property of red lead, makes this coating most effective for iron and steel surfaces as primer to keep it free from rust. Its saline water resistance properties make it suitable for marine environment.
AREA OF APPLICATION:
It is used on all iron and steel surfaces of all river or sea-going vessels, pontoons, sea-shore structures etc.
SHADE:
Self Yellow color of Zinc Chromate
TECHNICAL INFORMATION:
Viscosity
100 - 110 seconds/BSB4/30ºC
Gloss
Matt finish
Thinner
Roxy G .P. Thinner
Thinning ratio
10 – 15 %
Coverage
550-575 sft / 4 liters. On non absorbent surface
Recommended DFT
30- 35 microns / coat
Flash point
Above 70º F
DRYING TIME:
Surface dry:30-60 minutes
Hard dry:18 – 24 hrs
Recoating time:After 24 hrs
Shelf Life
One year in sealed container when kept in cool and dry place.
Pack Size
4 Ltr, 20 Ltr
SURFACE PREPARATION
The surface must be properly cleaned and free from rust, old paints, grease, wax, salt deposit or other contaminants. Repair surface defects before painting.
The information given herein is to the best of our knowledge accurate and is believed to be reliable. We do not take any responsibility since the conditions of use are beyond of our control. For further information please contact our sales center nearest to you.
